Gradall Forklift Part

Gradall Forklift Parts - Through the period when WWII caused a shortage of laborers, the well-known Gradall excavator was established in the 1940s as the idea of two brothers Ray and Koop Ferwerda. The brothers faced the problems of a depleted workforce because of the war. As partners in their Cleveland, Ohio construction company known as Ferwerda-Werba-Ferwerda they lacked the available workers to be able to do the delicate work of finishing and grading on their freeway projects. The Ferwerda brothers opted to build a machine which will save their company by making the slope grading task easier, more efficient and less manual.

Their first design model was a device with two beams set on a rotating platform that was attached atop a second-hand truck. A telescopic cylinder moved the beams back and forth that allowed the fixed blade at the end of the beams to pull or push dirt. Shortly improving the initial design, the brothers made a triangular boom to add more strength. What's more, they added a tilt cylinder that let the boom rotate 45 degrees in either direction. A cylinder was placed at the back of the boom, powering a long push rod to allow the machine to be equipped with either a bucket or a blade attachment.

Gradall introduced in the year 1992, with the introduction of the new XL Series hydraulics, the most ground-breaking adjustment in their machinery ever since their invention. This new system of top-of-the-line hydraulics enabled the Gradall excavator to provide high productivity and comparable power to the more conventional excavators. The XL Series put an end to the first Gradall equipment power drawn from gear pumps and low pressure hydraulics. These traditional systems effectively handled finishing work and grading but had a hard time competing for high productivity jobs.

The new XL Series Gradall excavators proved a remarkable increase in their digging and lifting ability. These models were made together with a piston pump, high-pressure hydraulics system that showed great improvements in boom and bucket breakout forces. The XL Series hydraulics system was likewise developed along with a load-sensing capability. Traditional excavators make use of an operator to choose a working-mode; where the Gradall system could automatically adjust the hydraulic power intended for the job at hand. This makes the operator's whole work easier and even conserves fuel at the same time.

Once their XL Series hydraulics came onto the market, Gradall was basically thrust into the highly competitive market of machinery meant to deal with excavation, demolition, pavement removal and different industrial tasks. Marketability was further enhanced with their telescoping boom due to its exclusive ability to better position attachments and to work in low overhead areas.

Click to Download the pdf

Forklift Parts

Parts for Portable Manlifts

Portable Manlift Parts - A very good way to utilize industrial machines whenever required for just short periods is to lease the item from a machine leasing company. These leasing companies' help contracting companies and some homeowners carry out needed jobs while saving their customers quite a bit of money in operating costs. A variety of industrial machines are offered...

More

---

Hyundai Forklift Part

Hyundai Forklift Parts - Ever since 1985, Hyundai Heavy Industries has been supplying and making various kinds of construction tools including: forklifts, excavators, skid steer loaders, and wheel loaders. The heavy industry division operates a highly efficient product-supply system. This particular system is driven by zero-tolerance policy, excellent quality control and one of the most superior automatic manufacturing lines. Led...

More

---

Clark Forklift Attachment

Clark Forklift Attachments - Performing worldwide, there are now 350,000 Clark forklifts and lift vehicles in operation, with more than 250,000 of those in service in North America. Clark has five major lines of lift trucks across the globe, making it one of the most expansive corporations in the industry. Heavy duty trucks ranging from 1,500lb to 18,000lb capacities, duel...

More

---

Fuses for Forklifts

Forklift Fuse - A fuse consists of either a wire fuse element or a metal strip within a small cross-section that are attached to circuit conductors. These units are usually mounted between two electrical terminals and quite often the fuse is cased inside a non-conducting and non-combustible housing. The fuse is arranged in series which could carry all the current...

More

---

Cascade Attachment

Cascade Attachments - Cascade Manufacturing Company was established in Portland, Oregon in 1943. They began as a small machine shop at first hiring 4 people. Sales for their initial year of operation totaled 60 thousand dollars. The very first recorded sales revenues involved the assembly and machining of stainless-steel pipe fittings, valves and various parts. During five years of operation,...

More

---

Forklift Grapple

Forklift Grapple - On excavators, grapples can be utilized along with the crowing operation of the bucket cylinder. They can mount directly to the jib and could be used when processing and handling domestic and aggregate waste materials, timber and construction materials. The grapple's boxed design has additional support bridging. This manufactured design provides the grapple with utmost support and...

More

---

Parts for High Reach Forklift

High Reach Forklift Parts - Forklifts are utilized in almost all boat yards and in industrial construction sites and in warehouse operations. The reach feature of a forklift is a vital component used in several applications like for instance whenever a shelving system is being utilized to stack pallets. A forklift operator would use the equipment's reach feature in order...

More

---

Spreader Bars for Forklift

Forklift Spreader Bars - ELME has been proudly operating since 1974, becoming the biggest independent spreader maker in the globe. They are a dedicated maker of spreaders meant for a lot of several applications like for instance the swop bodies, trailers, and handling of containers. ELME presently has over a hundred and twenty five employees with all engineering is done...

More

---